Tips, Trick & Advice for New Users

During my first few weeks with the Alta, there have been many highs and many lows. It’s not easy to master 3D printing, but with a little patience, you will be able to achieve great results. For anybody new to the Alta here are some tips, tricks & advice I have learned.

* Don’t be intimidated or afraid to use your printer.  It comes ready assembled and calibrated, you shouldn’t have to play around with the settings too much to achieve that all important first print. Failures will happen, don’t get discouraged. Enjoy your new toy.  The sooner you set it up, the sooner you can create 3D printed files. Set up is easy and Silhouette guide you through the process. 

 * Be Patient, things will go wrong. What works today may not work tomorrow!  See your mistakes as a positive and learn from them. Visit www.silhouette101.com and watch all the tutorial videos, they really do help.

 * Initially use Silhouette branded filament. It is set up to use this filament when dispatched, you shouldn’t have to change any settings to achieve a great print.  Whilst you are learning the machine and its processes don’t add another element that could result in failure.  Silhouette filament comes in 7 colours and is available in 500g rolls.

Hochanda, who sell the Alta & its consumables, are currently offering 10% off purchases using the following code JFD4UZX9


* Create test prints using the free files that come with your machine. These are tested with the Alta and there is no reason they shouldn’t print correctly in the software.  There is a great variety of free files that come with the machine.  If you do want to experiment try importing a 2D studio file to make 3D items, there are some great options to explore.  There are numerous third-party sites that offer free files for you to download, save this for when you are more comfortable using the Alta.  I started with the paperclip.  It’s a small file that doesn’t take too long to print or use much filament.

* Get to know your machine. Understand how the filament loads. Watch the process as it prints.  A perfect first layer is crucial to a good print.  There are things that you can do to help this process.  I add a thin layer of glue stick to the platform tape, it really seems to help with that first layer lying flat. I also use painters’ tape on the platform bed, it is slightly textured. Have the door closed during printing, I believe this helps heat up the environment inside the printer and helps the adhesion of the first layer. However, if you are in a slightly warmer climate having the door open may help.

* Keep an eye on things.  Some prints take a long time to complete.  I always watch the first layer, to check it has laid properly then check every 10/15 mins.

 * Join a Facebook group or forum dedicated to the Alta.  It is full of people who are passionate about the Alta and are always willing to help.

Hopefully, these pointers will help you to achieve consistently good prints.  For further FAQ please visit http://silhouettealta3d.co.uk/alta-faqs.html

The Alta is frustratingly addictive. It will take some time to get comfortable with the machine, it’s software and processes.  Learn as you go along and most importantly enjoy it!

Please Note: This post may contain affiliate links. By clicking on them and purchasing products through my links, I receive a small commission, at no extra charge to yourself.  Having affiliate links helps me fund this blog, and purchase silhouette relate materials to make projects.

Leave a Reply

Your email address will not be published. Required fields are marked *